CONDUCT GROUT is a ready-to-use geothermal injection mortar, developed for the correct filling of geothermal boreholes. CONDUCT GROUT version within the GEOTHERM-X range is an outsider due to the lack of cement.
CONDUCT GROUT HAS A KIWA CERTIFICATE UNDER BRL 5078
Premixed CONDUCT GROUT is composed of various natural ingredients. Once mixed with water, an easily injectable emulsion is formed. After injection, the emulsion remains very dimensionally stable in the borehole, so that groundwater levels are properly sealed. Due to the good coating of the liquid probe, a very good heat transfer is possible and thus the efficiency of the total system is further increased. At the same time, this cover also prevents point loads from the substrate from occurring on the probe.
CONDUCT GROUT can be used in all mixers available on the market (pulsation mixers, continuous mixers or colloidal mixers).
Data: Sedimentation: <2%
Conductivity coefficient: Between 1.4 and 1.7 W / (m.K) depending on the amount of water in the mixture.
+/- 1.5 T/M³
24 kg bag., Big Bag
k ̴ 1 x 10-10 m/sec
In 24 kg bag on a 1-way pallet of 1152 kg.