GEOTHERM-X ECO is a ready-to-use geothermal injection mortar, developed for the correct filling of geothermal boreholes. The ECO version within the GEOTHERM-X range is specifically intended for projects where a comparison is sought between the thermal conductivity and the cost of the product.
The pre-mixed Geotherm-x EC is composed of various natural ingredients. Once mixed with water, an easily injectable emulsion is formed. After injection, the emulsion remains very dimensionally stable in the borehole, so that groundwater levels are properly sealed. Due to the good coating of the liquid probe, a very good heat transfer is possible and thus the efficiency of the total system is further increased. At the same time, this cover also prevents point loads from the substrate from occurring on the probe.
Geotherm-x ECO can be used in all mixers available on the market (pulsation mixers, continuous mixers or colloidal mixers).
- Sedimentation: <2%
- Conductivity coefficient: 1.4 W / (m.K)
+/- 1.5 T/M³
24 kg bag., Big Bag
k ̴ 1 x 10-10 m/sec
In 24 kg bag on a 1-way pallet of 1152 kg.