Geotherm-x® is a ready-to-use injection mortar, a pre-mixed product for the correct filling of Geothermal boreholes.
Geotherm-x® is used to fill these boreholes with a well-sealing injection mortar with good thermal conductivity properties after introducing the liquid probes into the boreholes.
Pre-mixed Geotherm-x® is composed of various natural ingredients. Once mixed with water, an easily injectable emulsion is formed. After injection, the emulsion remains very dimensionally stable in the borehole, so that groundwater levels are properly sealed. Due to the good coating of the liquid probe, a very good heat transfer is possible and thus the efficiency of the overall system is further increased. At the same time, this cover also prevents point loads on the probe. Geotherm-x® can be used in all mixers available on the market (pulsation mixers, continuous mixers or colloidal mixers).
- Permeability: k ̴ 1 x 10-10 m/sec
- Sedimentation: < 1%
- Density λ ̴ 1,5 W / (m.K): 1.65 T/m³
- Density λ ̴ 1,6 W / (m.K): 1.74 /m³
- Thermal conductivity:
- λ ̴ 1,5 W / (m.K) ( 1000kg Geotherm-x® on 500 ltr water).
- λ ̴ 1,6 W / (m.K) (1000 kg Geotherm-x® on 450 ltr water)
+/- 1.1 T/M³
25 kg bag, Big Bag
only on command