GEOTHERM-X®

Category: SKU: GEOTHERM-X

Description

Geotherm-x® is a ready-to-use injection mortar, a pre-mixed product for the correct filling of Geothermal boreholes.

Geotherm-x® is used to fill these boreholes with a well-sealing injection mortar with good thermal conductivity properties after introducing the liquid probes into the boreholes.

Pre-mixed Geotherm-x® is composed of various natural ingredients. Once mixed with water, an easily injectable emulsion is formed. After injection, the emulsion remains very dimensionally stable in the borehole, so that groundwater levels are properly sealed. Due to the good coating of the liquid probe, a very good heat transfer is possible and thus the efficiency of the overall system is further increased. At the same time, this cover also prevents point loads on the probe. Geotherm-x® can be used in all mixers available on the market (pulsation mixers, continuous mixers or colloidal mixers).

  • Permeability: k ̴ 1 x 10-10 m/sec
  • Sedimentation: < 1%
  • Density λ ̴ 1,5 W / (m.K): 1.65 T/m³
  • Density λ ̴ 1,6 W / (m.K): 1.74 /m³
  • Thermal conductivity:
  • λ ̴ 1,5 W / (m.K) ( 1000kg Geotherm-x® on 500 ltr water).
  •  λ ̴ 1,6 W / (m.K) (1000 kg Geotherm-x® on 450 ltr water)
  •  

Additional information

Kleur

Grey/Black

Hardheid

NA

Vorm

Powdery

Bulkdensiteit

+/- 1.1 T/M³

Verpakking

25 kg bag, BB 500kg, Big Bag

Extra informatie

On a 1-way pallet of 1200 kg.

GEOTHERM-X

Category: SKU: GEOTHERM-X

Description

Geotherm-x® ist ein gebrauchsfertiger Injektionsmörtel, ein vorgemischtes Produkt zur korrekten Befüllung von geothermischen Bohrlöchern.

Geotherm-x® wird verwendet, um diese Bohrlöcher nach dem Einbringen der Flüssigkeitssonden in die Bohrlöcher mit einem gut abdichtenden Injektionsmörtel mit guten Wärmeleitfähigkeitseigenschaften zu füllen.

Das vorgemischte Geotherm-x® besteht aus verschiedenen natürlichen Inhaltsstoffen. Nach dem Mischen mit Wasser wird eine leicht injizierbare Emulsion gebildet. Nach der Injektion bleibt die Emulsion im Bohrloch sehr formstabil, so dass der Grundwasserspiegel ordnungsgemäß abgedichtet wird. Aufgrund der guten Beschichtung der Flüssigkeitssonde ist eine sehr gute Wärmeübertragung möglich und erhöht somit die Effizienz des Gesamtsystems weiter. Gleichzeitig verhindert diese Abdeckung auch, dass Punktlasten  auf der Sonde auftreten.

Geotherm-x® kann in allen auf dem Markt erhältlichen Mischern (Pulsationsmischern, kontinuierlichen Mischern oder kolloidalen Mischern) verwendet werden.

  • : λ ̴ 1,5 W / (m.K) (bij 1000kg Geotherm-x® op 500 ltr water).
    •  
  • Permeabilität: k ̴ 1 x 10-10 m/sec
  • Sedimentation : < 1%
  • Dichte λ ̴ 1,5 W / (m.K): 1.65 T/m³
  • Dichte λ ̴ 1,6 W / (m.K): 1.74 /m³
  • Leitfähigkeitskoeffizient :

  • λ ̴ 1,5 W / (m.K) ( 1000kg Geotherm-x® auf 500 ltr Wasser).
  • λ ̴ 1,6 W / (m.K) (1000kg Geotherm-x® auf 450 ltr Wasser)
  •  

 

Additional information

Kleur

Grau/Schwarz

Hardheid

NA

Vorm

Pudrig

Bulkdensiteit

+/- 1.1 T/M³

Verpakking

BB 500kg, Big Bag, Sacke 25 kg

Extra informatie

Auf einer Einwegpalette von 1200 kg.

GEOTHERM-X® ST

Category: SKU: GEOTHERM-X

Description

Geotherm-X ST® est un mortier d’injection sec et prêt à l’emploi.

Le Geotherm-X ST® est un produit pré-mélangé qui est composé de différents ingrédients naturels.
Après mélange avec de l’eau, ce produit devient un coulis facile à injecter.
Après mise en œuvre, le coulis garde un volume stable dans le trou de forage, ce qui garantit l’étanchéité des différentes nappes phréatiques entre elles.
Ce produit dispose d’un excellent coefficient de transfert de chaleur, ce qui donne des performances optimales et stables de l’installation géothermique.
Le Geotherm-X ST® dispose d’un coefficient de perméabilité inférieur à 10-9 m/s.
Ce produit répond à plusieurs agréations internationales.

Applications possibles

Geotherm-X ST® est utilisé dans le forage de puits pour les systèmes de pompe à chaleur.

Propriétés techniques

  • Permeabilité k < 10-9 m/s (ISO 17892-11)
  • Sedimentation: < 1%
  • Densité :
    • 1.65 T/m³ (pour λ ̴ 1,5 W / (m.K))
    • 1.74 T/m³ (pour λ ̴ 1,6 W / (m.K))
  • Valeur lambda :
    • 1.5 W / (m.K) (mélange 1000 kg poudre – 500 kg eau)
    • 1.6 W / (m.K) (mélange 1000 kg poudre – 450 kg eau)

Additional information

Kleur

Gris/Noir

Hardheid

NA

Vorm

Poudreux

Bulkdensiteit

+/- 1.1 T/M³

Verpakking

BB 500kg, Big Bag, Sac 25 kg

Extra informatie

Sur palette perdue de 1200 kg.